Roofing & exterior
Install or replace siding
Squares of vinyl, fiber-cement or engineered-wood lap siding for your house, with house wrap, starter, J-channel, corners, trim and nails — from the same answers as the exterior paint Sheet.
0 of 18 answers are yours. The rest are typical defaults — check each one.
Outside wall to outside wall, the long side.
The other way (the gable ends, if it has them).
Living space on every floor, if that’s what you know; we work out the walls from it. Leave 0 to use the length and width.
From the ground to the eaves.
About 9 ft a story
Typical
Triangle walls under a roof peak: 2 on a plain gable roof, 0 on a hip roof.
Roof pitch at the gables
default
Fiber-cement lap
8¼″ planks, Hardie-type
Engineered-wood lap
LP SmartSide-type
Shakes
Cedar or fiber cement
Foam backer + wrap
Over uneven walls
Keep the wrap that’s there
Sound and taped
4 on a plain box; more where the walls jog.
Where two walls meet facing out, as on an L-shaped house.
New soffit and fascia too?
When was the house built?
default
Old siding may be asbestos-cement shingles, and old paint may hold lead (before 1978 in the US, 1990 in Canada).