Floor tile
Floors & tile
Tile a floor
DIY OK
Backer, thinset, tile and grout sized to your tile — bathroom, kitchen or entry, with the toilet reset when there is one.
Answers
Sheet
0 of 12
answers are yours. The rest are typical defaults — check each one.
Room length
default
ft
in
Room width
default
ft
in
Is there a tub along one wall?
We subtract a 30″ × 60″ footprint.
Tile size
default
12×24
Most popular
12×12
24×24
8×48 plank
Wood look
Mosaic
12×12 sheets
Layout
default
Straight grid
Offset (brick)
Max ⅓ for long tile
Diagonal
Grout joint
default
1/16″
Rectified tile
⅛″
3/16″
¼″
Subfloor
default
Plywood or OSB
Concrete slab
Underlayment
default
¼″ cement board
Uncoupling membrane
Natural stone (marble, travertine)?
Does the floor bounce when you walk?
default
No, it feels solid
A little
Yes
Pull and reset the toilet?
Home built before 1981?
default
Old vinyl floors and their glue can contain asbestos.
No, 1981 or later
Yes
Don’t know
Know the year your home was built?
Save
We’ll remember it for paint and tile Sheets. It stays on this device.
See the Sheet
Start over
Common sizes
5×8
8×10
10×12
Tile
19
Thinset
2
See the Sheet